This is the wheel that wind the camera.
THis is the O-ring that seals the camera. It is located around the pin that the wheel is attached to the camera with.
This is the front of the outer casing without the wheel on it.
This is the camera frame after everything has been removed
This si the spring that moves the peice that allows the camera to take pictures. It is located around the same pin as the ratchet and is located against th camera frame.
This is tha camera at this stage.
This is the peice that allows the camera to take pictures. it is located on a pin closest to the front of the camera.
This is the top of the camera at this stage.
This is the ratchet that only allows the winding wheel to spin in one direction. it is located on a pin on the top of the camera.
This is the back of the camera with out the wheel in it.
This is the wheel that spins when the camera is reset. It is located in a slit at the back of the camera.
This is what the camera should look like at this stage.
This is the pin that rewinds the camera to reset it it goes in a hole near the back of the camera.
THis is the winding wheel it goes on a crcle over where the film canister would be.
THis is the pin that the white wheel goes on.
This is the wheel that tells you how many pictures you have left. It goes on a pin next to the winding wheel.
This is the camera without the cover.
This is the cover for the winding mechanism to remove it you must pull on three seperate tabs.
This is what the main camera frame should look like when all of the listed parts have been removed.blehhhh
This is the peice of plastic that goes under the main lense.
This is the meatal flap. It swigs infront of the lense with the spring. The hole in the flap goes on a pin on the camera frame.
This is the spring that allows the camera to take pictures. It is attached to a pin on the camera frame and to a little pin on the meatal flap. If this spring gets mangled when takng apart the camera will not work!
